Situation
Check Items
Solution
Battery Low LED lights up
Battery is running low.
Please proceed to shutdown
your load immediately.
Recharge the battery.
Fault LED lights up
ct the output load
d
ad has probably
rted. Otherwise,
r service.
Disconne
immediately. Switch Off an
On the UPS to see if the
"Fault" LED is still on. If not,
your output lo
been sho
call fo
System fails to backup
when Utility fails.
Che
Battery conn
(for extend
config
Check
Termin
within its
Off the UPS.
ct the input power
rear panel and
Main Switch to
S is able to start
ry. If problem
s, call for service.
ck UPS to
ection
ed battery
uration).
the Battery
al voltage if is
rating (12V)
Switch
Disconne
cord from the
push on the
see if the UP
up. If not, replace battery if
necessa
persist
UPS is normal but no
Output to load
Check to see
power cords
properly connected
as described in the
installation
pro
Check all outlets to see if they
are properly connected. If
problem persists, call for
service.
if all
are
cedures.
Strange noise and smell
wn the
ect
m the UPS and
service.
Immediately shut do
whole System. Disconn
the power fro
call for
6.3. Maintenance
Clean the dust from the ventilation ope
ar panel.
1. Turn off the UPS and wipe
2. Periodically unplug the pow
tacle to test
the batteries condition.
Note: Be sure you have already save
proceed with
the battery discharging capability test.
27
Bun
ftwa
allation
allation
1. Connect the male connector of RUPS II cable
.
2. Connect the female connector of RUPS II cabl
rt. If
there is only a DB25 connector of the RS232 p
DB9-DB25 adapter to convert it.
7.2. Software Installation
tallatio
A. RUPS II for MS-DOS
1. Insert the system diskett
sk
execute INSTALL.EXE u
A:\>CD\DOS<Enter>
TALL
2. Please select the MS-DO
t
3. And create the path of R
t
designated directory to
it. (You may use the defa
RUPS II)
m
ill copy all required f
designated path. It will also append a Load RU
AUTOEXEC.BAT file automatically. After a c
e
installation program will execute the
modify the configurations of RUPS II now.
B. RUPS II for Windows 3.1, Windows 95, 98, 2000, NT, XP
his procedure can
2.
up is labeled as RUPS2W, you may rename it to the
Chapter 7.
dled So
re Inst
Guide
7.1. Hardware Inst
to the UPS communication port
e to a dedicated RS232 po
ort available, you may use a
7.2.1. RUPS II Ins
n
e into your floppy di
nder MS-DOS.
driver and
A:\DOS>INS
<Enter>
S menu from the ins
UPS II system disket
ult values of
allation menu box,
e and the
4. The installation progra w
iles of the RUPS II into the
PS.EXE Command in your
omplete installation is done, th
CONFIG.EXE automatically. You may
nings and intakes on the re
the casing with a damp cloth.
er cord of the UPS from the wall recep
d your application before you
1. Execute "A:\Windows\setup.exe" under Windows system.(T
be achieved either by file manager or from the "RUN" command of Windows.)
The RUPS II Setup gro
desired group you wish.
26
