Timeclock Configuration Quick Reference
14.4Kbps Modem Option Installation Guide
13
Timeclock Configuration Quick Reference
The following table provides a quick reference for the timeclock configuration
segment of the 14.4Kbps Modem option installation process.
Step
Description
1
Enter Command Mode and then enter command 90 for Program
Mode.
2
Enter a value between 1 and 4 to specify # of rings before the modem
answers. (Procedure 9, Step 1)
3
Choose a modem-to-modem protocol. (Procedure 10, Step 7)
4
Choose a country code. The default code for North America is 22.
Note that this is now programmable. (Procedure 10, Step 8)
5
Choose error correction/data compression. (Procedure 10, Step 9)
6
Exit Program Mode and return to Command Mode.
7
Use command 118 to verify that the timeclock recognizes a modem,
and then confirm all of your modem selections.
8
Close and secure the timeclock’s front cover.
9
Configure all other timeclocks, which are connected at the remote site
by way of RS-485, with these values:
!
Modem Option (Modem not installed)
Configure 0 for Procedure 9, Step 1
!
Baud Rate
(Same as timeclock with modem, Procedure 10, Step 1)
!
10mSec Delay
Enter 132 for Procedure 10, Step 2.
(Add 128 to the current value plus 4 for the end of text indicator).
10
At the eTIME site, be sure that the modem is connected to the PC and
working properly. Follow the instructions supplied by the modem
manufacturer to verify this connection.
11
Connect the eTIME PC modem to a live phone line.
