5 Installation
Attention:
Storing, mounting and operation under weather conditions is
permissible only in vertical position, as otherwise water can get
into the instrument.
Remark:
When using fastening adapters (angle, traverses, hangers etc.) please take a
possible effect by turbulences into consideration.
Remark:
It is advisable to attach lightning rod
,
order no.
4.3100.99.000
i
n areas with
considerable lightning activity
.
5.1 Mounting of wind vane
Tools
•
Screw wrench SW 8
Mounting of wind vane
1. Remove wind transmitter
housing
and wind vane from the
packing.
2. Screw off cap nut (SW 8) The
gasket remains in the protective
cap
2. Mounting of wind vane acc. to
figure. The dowel at the wind
vane must catch the notch of the
protective cap. The cap nut is to
be screwed tightly.
6 - 14
021591/02/09