Safety Instructions
•
Before operating with or at the device/product, read through the operating instructions.
This manual contains instructions which should be followed on mounting, start-up, and operation.
A non-observance might cause:
- failure of important functions
- Endangering of persons by electrical or mechanical effect
- Damage to objects
•
Mounting, electrical connection and wiring of the device/product must be carried out only by a qualified technician
who is familiar with and observes the engineering regulations, provisions and standards applicable in each case.
•
Repairs and maintenance may only be carried out by trained staff or
Adolf Thies GmbH & Co. KG
. Only
components and spare parts supplied and/or recommended by
Adolf Thies GmbH & Co. KG
should be used for
repairs.
•
Electrical devices/products must be mounted and wired only in voltage-free state.
•
Adolf Thies GmbH & Co KG
guarantees proper functioning of the device/products provided that no
modifications have been made to the mechanics, electronics or software, and that the following points are
observed:
•
All information, warnings and instructions for use included in these operating instructions must be taken into
account and observed as this is essential to ensure trouble-free operation and a safe condition of the measuring
system / device / product.
•
The device / product is designed for a specific application as described in these operating instructions.
•
The device / product should be operated with the accessories and consumables supplied and/or recommended
by
Adolf Thies GmbH & Co KG
.
•
Recommendation: As it is possible that each measuring system / device / product under certain conditions, and
in rare cases, may also output erroneous measuring values, it is recommended using redundant systems with
plausibility checks with
security-relevant applications
.
Environment
•
As a longstanding manufacturer of sensors Adolf Thies GmbH & Co KG is committed to the
objectives of environmental protection and is therefore willing to take back all supplied products
governed by the provisions of "
ElektroG
"
(
German Electrical and Electronic Equipment Act)
and to perform environmentally compatible disposal and recycling. We are prepared to take
back all Thies products concerned free of charge if returned to Thies by our customers
carriage-paid.
•
Make sure you retain packaging for storage or transport of products. Should packaging
however no longer be required, arrange for recycling as the packaging materials are designed
to be recycled.
Documentation
•
© Copyright
Adolf Thies GmbH & Co KG
, Göttingen / Germany
•
Although this operating instruction has been drawn up with due care,
Adolf Thies GmbH & Co KG
can accept
no liability whatsoever for any technical and typographical errors or omissions in this document that might
remain.
•
We can accept no liability whatsoever for any losses arising from the information contained in this document.
•
Subject to modification in terms of content.
•
The device / product should not be passed on without the/these operating instructions.
2 - 14
021591/02/09