Adobe 22011292 - Audition - PC, Using Instruction

Page: 140 / 147

136
USING ADOBE AUDITION
Saving and exporting
Last updated 2/16/2012
Export to Final Cut Pro Interchange format
1 In the Multitrack Editor, choose File > Export > FCP XML Interchange Format.
2
Specify a filename and location.
3 To include audio markers and information from the Metadata panel, select Include Markers And Other Metadata.
The following session elements are excluded from the exported file:
•
The second channel of stereo clips. (All clips and tracks become mono.)
• Overlapping clips
•
Effects and track EQ.
• Automation envelopes other than clip volume and mono-to-stereo track panning.
•
Output routing, sends, buses, and the Master track.
More Help topics
“ Export a multitrack mix to Premiere Pro CS5.5 ” on page 128
Export multitrack mixdown files
After you finish mixing a session, you can export all or part of it in a variety of common formats. (See “ Audio file
formats ” on page 24.) When you export, the resulting file reflects current volume, pan, and effects settings routed to
the Master track.
To quickly mix specific audio clips down to a single track, use the Multitrack > Bounce To New Track command. (See
“
Create a single audio clip from multiple clips ” on page 122.)
1
If you want to export part of a session, use the Time Selection tool to select the desired range.
2
Choose File > Export > Multitrack Mixdown.
(Alternatively, choose Multitrack > Mixdown To New File to open the mixdown in the Waveform Editor and skip the
steps below.)
3
Specify a filename and location, and choose a file format.
4
Set the following options:
Sample Type
Indicates the sample rate and bit depth. To adjust these options, click Change. (See “ Convert the sample
rate of a file ” on page 53.)
Format Settings
Indicates data compression and storage modes; to adjust these, click Change. (See “ Audio format
settings ” on page 137.)
Include Markers and Other Metadata
Includes audio markers and information from the Metadata panel in saved files.
(See “ Working with markers ” on page 45 and “ Viewing and editing XMP metadata ” on page 138.)
In the Waveform Editor, choose Edit > Edit Original to open the multitrack session that created a mixdown file. This
command requires embedded metadata in the file. (See “
Embed edit-original data in exported mixdown files ” on
page 129.)
More Help topics
“ Create an audio clip from a bus or master track ” on page 123