ADLINK Technology ReadyBoard 620, Reference Manual

Page: 18 / 50

Chapter 2 Product Overview
12 Reference Manual ReadyBoard 620
Specifications
Physical Specifications
Table 2-4 lists the physical dimensions of the board.
Power Specifications
Table 2-5 lists the ReadyBoard 620 current measurements.
Operating configurations:
•
In-rush operating configurations include video and 512MB DDR RAM.
•
Idle operating configurations include the in-rush configurations as well as one IDE hard drive with
Windows XP SP2, floppy, keyboard, and mouse.
•
BIT = Burn-In-Test. Operating configurations include idle configurations as well as four serial loop-
backs, one USB Jump Drive, one on-board Compact Flash drive with 64MB Compact Flash, two
Ethernet connections, one USB Compact Flash reader with 64MB Compact Flash, one external-power
USB hard drive, one external-power USB CD-ROM drive.
JP6 – COM3 RS485 Termination (pins 1-2) No Termination (removed)
Default
JP6 – COM4 RS485 Termination (pins 3-4) No Termination (removed)
Default
JP7 – CMOS Reset Normal (pins 1-2) Default Clear (Reset CMOS, pins 2-3)
Table 2-4. Weight and Footprint Dimensions
Parameter Dimensions
NOTE
Overall height is measured from the upper board
surface to the highest permanent component (at
Serial A) on the upper board surface. This
measurement does not include the heatsinks
available for these boards.
Weight 0.117 kg. (0.26 lb.)
Height (overall) 28.44 mm (1.12")
Width 115 mm (4.5")
Length 165 mm (6.5")
PCB Thickness 1.574 mm (0.062")
Table 2-5. Power Supply Requirements
Parameters Characteristics (500 Mhz Geode, LX800)
Input Type Regulated DC voltages
In-rush Current 14.20A/71.00W
Idle Power 1.51A/7.54W
BIT Current 2.19A/10.94W
Table 2-3. Jumper Settings (Continued)