manualshive.com logo in svg
background image

ROCKY – P218BXA

Pentium

®

 II & Sound

SBC

@Copyright 1999
All Rights Reserved.
Manual second edition June.1, 1999
The information in this document is subject to change without prior notice in
order to improve reliability, design and function and does not represent a
commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability to use
the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.

Trademarks

ROCKY-P218BXA is registered trademarks of ICP Electronics Inc. IBM PC is
a registered trademark of International Business Machines Corporation. Intel
is a registered trademark of Intel Corporation. AMI is registered trademarks of
American Megatrends, Inc. Other product names mentioned herein are used
for identification purposes only and may be trademarks and/or registered
trademarks of their respective companies.

Содержание ROCKY-P218BXA Pentium II & Creative Sound








































Отзывы: