24
•
Bypass and WDT
When power on default setting is Normal State
Power
WDT
State
Note
Utility(DOS)
Off
Disable Bypass
Relay physical
character
--
On
Disable Normal
Default Power on
State
--
On
Enable Normal
Enable WDT and
keep reload WDT
LANWDT.EXE
On
Enable Bypass
Enable WDT but will
timeout if no reload
ENWDT.EXE
On
Disable Normal
Disable WDT and set
to normal mode
DISWDT.EXT
Off
Disable Bypass
Relay physical
character
--
When the system is power off, the communication is in the
Bypass
State
. After the power on, the communication will be initialed according
to the JP4~7 setting. The default WDT is disabled.
The communication state will be change from
Default State
(either
Bypass State
or
Normal State
) into
Normal State
only when user
enable the WDT.
Under the
Normal State
, the users’ software must reload the WDT to
avoid timeout. Once the WDT timeout,
Normal State
will change to
Bypass State
automatically, the WDT is still enabled but keep in
timeout status.
To release the timeout, user must disable the WDT by software or turn
the power off. The communication will change to
Default State
. When
the system power turns off, the communication will change to
Bypass
State.
Summary of Contents for PCI-8213
Page 1: ...PCI 8213 8214 4 Port 2 Port PCI Ethernet Controller User s Guide Recycled Paper...
Page 2: ......
Page 8: ......
