background image

Preface  

iii

NuPRO-A331

Preface

Copyright 2016 ADLINK Technology Inc.

This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form 
without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior 
notice in order to improve reliability, design, and function and does 
not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or 
inability to use the product or documentation, even if advised of 
the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global 
environmental preservation through compliance with the Euro-
pean Union's Restriction of Hazardous Substances (RoHS) direc-
tive and Waste Electrical and Electronic Equipment (WEEE) 
directive. Environmental protection is a top priority for ADLINK. 
We have enforced measures to ensure that our products, manu-
facturing processes, components, and raw materials have as little 
impact on the environment as possible. When products are at their 
end of life, our customers are encouraged to dispose of them in 
accordance with the product disposal and/or recovery programs 
prescribed by their nation or company.

Trademarks

Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks 
of their respective companies.

Summary of Contents for NuPRO-A331







































































































Reviews: