ADLINK Technology NuPRO-A331, User Manual

Page: 4 / 102

iv Preface
Using this Manual
Audience and Scope
The NuPRO-A331 User’s Manual is intended for hardware
technicians and systems operators with knowledge of installing,
configuring and operating industrial grade single board computers.
Manual Organization
This manual is organized as follows:
Preface: Presents important copyright notifications, disclaimers,
trademarks, and associated information on the proper understand-
ing and usage of this document and its associated product(s).
Chapter 1, Introduction: Introduces the NuPRO-A331, its fea-
tures, specifications and mechanical drawing.
Chapter 2, Hardware Information: Provides information on
board layout, connectors and jumpers for configuring the
NuPRO-A331.
Chapter 3, Getting Started: Illustrates how to install components
on the NuPRO-A331 such as CPU, heatsink, and memory mod-
ules.
Chapter 4, Driver Installation: Provides information on how to
install the NuPRO-A331 device drivers.
Chapter 5, BIOS Setup: Describes basic navigation for the
AMIBIOS®8 BIOS setup utility.
Appendix A, Watchdog Timer: Presents information on imple-
menting the watchdog timer.
Appendix B, System Resources: Presents information on I/O
mapping, IRQ routing, and resource allocation.
Important Safety Instructions: Presents safety instructions all
users must follow for the proper setup, installation and usage of
equipment and/or software.
Getting Service: Contact information for ADLINK’s worldwide
offices.