BIOS Setup
69
NuPRO-A331
5.7.1
Graphics and Memory Configuration
Initial Graphics Adapter
Select which graphics controller to use as the primary boot
device. (“PCI” includes PCI slot and and PCIe Mini Card. PCI
will be first.)
IGD: Integrated graphics only.
PCI/IGD: Detect PCI graphics first, then integrated graphics
IGD Graphics Mode Select
Selects the amount of system memory used by the integrated
graphics device.
Boot Display Device
This item allows the user to configuration the type of external
display used during boot up.
CRT: VGA display only during POST and DOS.
DVI: DVI display only during POST and DOS.
CRT+DVI: VGA and DVI display during POST and DOS.
Summary of Contents for NuPRO-A331
