ADLINK Technology NuPRO-860 Series, User Manual

Page: 44 / 54

36 Device Driver Installation
4. Click Next on the Welcome screen to read and agree to
the license agreement. Click Yes if you agree to con-
tinue. NOTE: If you click No , the program will terminate.
5. Click Next on the Readme Information screen to install
the INF files.
6. Click Finish to restart the system when prompted to do
so.
7. Follow the screen instructions and use the default set-
tings to complete setup when Windows 2000/XP
restarts. Upon restart, Windows may display that it has
found new hardware and is installing drivers for them.
Select
Yes , if prompted to restart Windows 2000/XP.
This completes the installation of the Intel® Chipset Soft-
ware Installation Utility .
4.2 VGA Driver Installation
Windows 2000/XP will attempt to install a standard VGA driver
automatically. To guarantee compatibility, manually install the
most up-to-date VGA driver, which is provided on the ADLINK CD.
After installing Windows 2000/XP, install the most up-to-date
driver by following these steps:
1. Boot Windows 2000/XP, then run the program
X:\NuPRO\NuPRO-860\VGA\win2k_xp142.exe , where
X is the CD drive letter.
2. The VGA driver will automatically be installed onto the
system.
3. Restart the system.
4.3 LAN Driver Installation
This section describes the LAN driver installation process for the
Intel® 82541GI Gigabit Ethernet Controller under Windows
2000/XP. The Intel® software utilities package include a Diagnos-
tics Utility, Makedisk Utility, and the 10/100/1000Mbps Ethernet
device drivers. All drivers and utilities are stored in the ADLINK CD
under the directory:
X:\NuPRO\NuPRO-860\LAN, where X is the