manualshive.com logo in svg

ADLINK Technology NuDAQ, User Manual

Share
Download
ADLINK Technology NuDAQ User Manual Download Page 17

Introduction

 5

1.4

Unpacking Checklist

Before unpacking, check the shipping carton for any damage. If
the shipping carton and/or contents are damaged, inform your
dealer immediately. Retain the shipping carton and packing mate-
rials for inspection. Obtain authorization from your dealer before
returning any product to ADLINK.

Check if the following items are included in the package.

X

PCI-7442/PCI-7443/PCI-7444 card

X

ADLINK All-in-One CD

X

User’s manual

If any of the items is damaged or missing, contact your dealer
immediately.

NOTE

The packaging of OEM versions with non-standard con-
figuration, functionality, or package may vary according 
to different configuration requests.

CAUTION

The boards must be protected from static discharge and 
physical shock. Never remove any of the socketed parts 
except at a static-free workstation. Use the anti-static bag 
shipped with the product to handle the board. Wear a 
grounded wrist strap when servicing.

Summary of Contents for NuDAQ



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands