ADLINK Technology NuDAQ PCI-9114DG User Manual Download Page 19

Page: 19 / 95

Installation

•

Installation

This chapter describes how to install the PCI-9114. Please follow the
following steps to install the cards.

♦

Check what you have (section 2.1)

♦

Unpacking (section 2.2)

♦

Check the PCB and jumper location(section 2.3)

♦

Install the hardware and setup and jumpers (section 2.4, 2.7)

♦

Install the software drivers and run utility to test (section 2.5)

♦

Cabling with external devices (section 2.6, 2.8)

2.1 What You Have

In addition to this

User's Manual

, the package includes the following

items:

•

PCI-9114 Enhanced Multi-function Data Acquisition Card

•

ADLINK CD

•

Software Installation Guide

If any of these items is missing or damaged, contact the dealer from
whom you purchased the product. Save the shipping materials and
carton in case you want to ship or store the product in the future.

Summary of Contents for NuDAQ PCI-9114DG
































































































Search results

Summary of Contents for NuDAQ PCI-9114DG

Reviews:

Related manuals for NuDAQ PCI-9114DG

Brands by name

Popular brands

ADLINK Technology NuDAQ PCI-9114DG, User Manual

Search results

Summary of Contents for NuDAQ PCI-9114DG

Reviews:

Related manuals for NuDAQ PCI-9114DG

Brands by name

Popular brands