nanoX-EL User’s Guide
PICMG COM.0 R3.0
Page 13
Copyright © 2021 ADLINK Technology, Inc.
2.5.
Ethernet
Integrated MAC with MaxLinear® 2.5Gigabit Ethernet PHY, GPY211 or GPY215
Supports 2.5Gbit/s or 1000/100/10 Mbit/s connection
Supports TSN on Yocto Linux OS (based on GPY215 and the CPU SKUs with Intel TCC feature) (TSN may support by project basis)
2.6.
Multi I/O and Storage
USB
2x USB 3.0/2.0/1.1 (USB 0,1), 6x USB 2.0/1.1 (USB 2,3,4,5,6,7)
SuperSpeedPlus, SuperSpeed, High-Speed, Full-Speed and Low-Speed USB signalling
Note: Carrier board must be designed for Gen2 operation.
UART
Two UART interfaces SER0 and SER1 RX/TX on module
Console Redirection COM 1 or COM 2 selectable in BIOS
Up to 4 serial ports supported by standard BIOS, including Super I/O on carrier board
COM Port
Description
IRQ
Address
Console Redirection Support
COM 1 Supported by module (SER0, A98/A99), via embedded controller 4
0x3F8
Yes
COM 2 Supported by module (SER1, A101/A102), via embedded controller 3
0x2F8
Yes
COM 3 Supported by Super I/O (W83627DHG) on carrier board
5
0x240
Yes
COM 4 Supported by Super I/O (W83627DHG) on carrier board
7
0x248
Yes
Note: SER0, SER1 from SoC HSUART are BOM option support by project basis
