ADLINK Technology IMB-M43, User Manual

Page: 36 / 88

24 Getting Started
2.2 Mounting the motherboard
Mount the motherboard to the chassis with screws through the
provided screw holes.
2.3 Installing Memory Modules (DIMM)
The IMB-M43 provides four 288-pin DDR4 DIMM slots supporting
Dual Channel Memory technology.
Install DRAM before installing add-on cards.
Remove add-on cards before removing any DRAM.
To install a memory module:
1. Locate the DIMM slots on the motherboard.
CAUTION:
Avoid over-tightening screws to prevent PCB damage.
NOTE: NOTE:
X
Dual channel configuration requires installation
of DDR4 DIMM pairs of identical brand, speed,
size, and chip type.
X
Dual Channel Memory technology is disabled
when only one memory module is installed.
CAUTION:
X
DDR, DDR2 or DDR3 memory modules cannot
be installed in a DDR4 slot; motherboard and
DIMM damage may result.
X
Permanent damage to the motherboard and
DIMM will result if the DIMM is forced into the
slot in an incorrect orientation.