Page 37
ETX-EV133
User’s Manual
The field defines the power-off mode when using an ATX power supply. The Instant-Off mode
means powering off immediately when pressing the power button. In the Delay 4 Sec mode, the
system powers off when the power button is pressed for more than four seconds or places the
system in a very low-power-usage state, with only enough circuitry receiving power to detect
power button activity or resume by ring activity when press for less than four seconds. The
default is 'Instant-Off'.
State After Power Failure
On
:
After a power failure, the system will automatically reboot as soon as power is re-
stored.
Off
:
After a power failure, the system will not reboot when power is restored. The
system needs to be turned on again manually.
Auto :
After a power failure, the system will automatically reboot as soon power is re-
stored if the PC was turned on when the power failed. If the PC was already turned off when the
power failed, the system needs to be turned on again manually.
Wake Up Events
Setting an event on each device listed to awaken the system from a soft off state.
VGA
LPT & COM
HDD & FDD
PCI Master
Power On by PCI Card
Wake Up on LAN/Ring
RTC Alarm Resume
Date (of Month)
Resume Time (hh:mm:ss)
Primary INTR
IRQs Activity Monitoring
