Installation
•
25
4.
When you need to install two same type serial communication
cards in one NT system, you must confirm to let one card’s SW1-1
is ON while the other card’s SW1-1 is OFF for cPCI-3534 and JP1
is ON while the other card’s JP1 is OFF for cPCI-3538. The same
manner can be apply to cPCI-3544 with SW1-3 adjusting to
different number.
5.
The card with switch ON will have low COM port number. The card
with switch OFF will have higher COM port number follow the card
with switch ON.
6.
If you install two the same type serial communication modules with
switch ON or OFF simultaneously, we can not confirm that both
cards will active properly.
7.
If you install multiple cards in one NT system simultaneously,
please confirm that the COM port number assigned do not overlap
for different card. Or you may have improperly operation in your
system.
8.
For easy to maintain NT system’s COM port number, we suggest
that you must set the switch ON for the first card to be installed in
NT system.
9.
After you install the driver, you need to reboot your PC, then you
can have more COM port available.
10. If you had installed our NT driver in your system before, you might
remove this driver firstly, then you can install our new version driver.
Or you might have some problem in your system.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Summary of Contents for cPCI-3534
Page 3: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com...
Page 7: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com...
Page 9: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com...
