Chapter 3
Hardware
CoreModule 720
Reference Manual
25
Note:
The shaded table cells denote power or ground.
Table 3-7
describes the pin signals of the USB2 and USB3 header, which consists of 10 pins in two rows,
with odd/even (1, 2) pin sequence, and 0.079" (2mm) pitch.
Note:
The shaded table cells denote power or ground.
Table 3-8
describes the pin signals of the USB4 and USB5 header, which consists of 10 pins in two rows,
with odd/even (1, 2) pin sequence, and 0.079" (2mm) pitch.
Note:
The shaded table cells denote power or ground.
9
USB_GND0
USB0 Ground
10
USB_GND1
USB1 Ground
Table 3-7. USB2 and USB3 Interface Pin Signals (J14)
Pin #
Signal
Description
1
USB-PWR_2
USB2 Power – VCC (+5V +/-5%) power goes to the port through an on
board fuse. Port is disabled if this input is low.
2
USB-PWR_3
USB3 Power – VCC (+5V +/-5%) power goes to the port through an on
board fuse. Port is disabled if this input is low.
3
CONN_USB2_N USB2 Port Data Negative
4
CONN_USB3_N USB3 Port Data Negative
5
CONN_USB2_P
USB2 Port Data Positive
6
CONN_USB3_P
USB3 Port Data Positive
7
USB_GND2
USB2 Ground
8
USB_GND3
USB3 Ground
9
USB_GND2
USB2 Ground
10
USB_GND3
USB3 Ground
Table 3-8. USB4 and USB5 Interface Pin Signals (J13)
Pin #
Signal
Description
1
USB-PWR_4
USB4 Power – VCC (+5V +/-5%) power goes to the port through an on
board fuse. Port is disabled if this input is low.
2
USB-PWR_5
USB5 Power – VCC (+5V +/-5%) power goes to the port through an on
board fuse. Port is disabled if this input is low.
3
CONN_USB4_N USB4 Port Data Negative
4
CONN_USB5_N USB5 Port Data Negative
5
CONN_USB4_P
USB4 Port Data Positive
6
CONN_USB5_P
USB5 Port Data Positive
7
USB_GND4
USB4 Ground
8
USB_GND5
USB5 Ground
9
USB_GND4
USB4 Ground
10
USB_GND5
USB5 Ground
Table 3-6. USB0 and USB1 Interface Pin Signals (J12) (Continued)
