ADLINK Technology COM Express cExpress-BT2, User Manual

Page: 64 / 88

58
BIOS Setup
7.3.11.1. Serial Port Console > Console Redirection Settings
Feature Options Description
COM1/COM2
Console Redirection Settings Info only
Terminal Type VT100
VT100+
VT-UTF8
ANSI
VT100: ASCII char set.
VT100+: Extends VT100 to support color, function
keys, etc. VT-UTF8: Uses UTF8 encoding to map
Unicode chars onto 1 or more bytes.
ANSI: Extended ASCII char set.
Bits per second 9600
19200
38400
57600
115200
Selects serial port transmission speed. The speed
must be matched on the remote computer. Long or
noisy lines may require lower speeds.
Data Bits 7
8
Select data bits.
Parity None
Even
Odd
Mark
Space
Select parity.
Stop Bits 1
2
Select number of stop bits.
Flow Control None
Hardware RTS/CTS
Select flow control.
VT-UTF8 Combo Key Support Disabled
Enable
Enable VT-UTF8 combination key support for
ANSI/VT100 terminals.
Recorder Mode Disabled
Enable
With this mode enabled only text will be sent. This is
to capture terminal data.
Resolution 100x31 Disabled
Enable
Enables or disables extended terminal resolution
Legacy OS Redirection 80x24
80x25
On legacy OSes, the number of rows and columns
supported by redirection
Putty KeyPad VT100
LINUX
XTERMR6
SCO
ESCN
VT400
Select FunctionKey and KeyPad on Putty.
Redirection After BIOS Post Always Enabled
BootLoader
The Settings specify if BootLoader is selected, then
legacy console redirection is disabled before booting
to legacy OS. Default value is Always Enable which
means legacy console redirection is enabled for
legacy OS.