ADLINK Technology COM Express cExpress-BT2, User Manual

Page: 57 / 88

cExpress-BT2
BIOS Setup
51
7.3.3.1. AMI Graphics Output Protocol Policy
Feature Options Description
Intel(R) Valley View Graphics
Controller
Info only
Intel(R) GOP Driver Info only
Output Select
[List connect device] CRT Output Interface.
Brightness Setting
[LFP device connect only] 255 Set GOP Brightness value
BIST Enable Enabled
Disabled
Starts or stops the built-in self-test (BIST) on the
integrated display panel.
7.3.4. SATA
Feature Options Description
SATA Info only
SATA Controller(s) Enabled
Disabled
Enable/Disable Serial ATA.
SATA Mode Selection IDE Mode
AHCI Mode
Select IDE/AHCI
SATA Test Mode Enabled
Disabled
Test Mode enable/disable
SATA Controller Speed Gen1
Gen2
SATA speed support Gen1 or Gen2.
SATA Port Configuration Submenu
7.3.4.1. SATA > SATA Port Configuration
Feature Options Description
SATA Port Configuration Info only
Port X Disabled
Enabled
Enable/Disable SATA port X.
HotPlug Enabled
Disabled
Enable/Disable SATA port X hotplug.