Page 56
Feature
Options
Description
DDI function choose
Display Port
HDMI
Select DDI function choose to display port or HDMI.
Primary IGFX Boot Display
VBIOS Default
Select the Video Device which will be activated during POST
LCD Panel Type
VBIOS Default
640X480
800X600
1024X768
1280X1024
1400X1050
1600X1200
1366X768
1680X1050
1920X1200
1440X900
1600X900
1024X768 LVDS2
1280X800
1920X1080
2048X1536
Select LCD panel used by Internal Graphics Device by selecting the
appropriate setup item.
Active LFP
No LVDS
Edp Port-A
Select the Active LFP Configuration.
Panel Scaling
Auto
Off
Force Scaling
Select the LCD panel scaling option used by the Internal Graphics Device.
GT – Power Management Control
Info only
GT Info
Info only
Display GT info of Intel Graphics.
RC6 (Render Standby)
Enabled
Disabled
Check to enable render standby support.
GT OverClocking Support
Enabled
Disabled
Enable / Disable GT OverClocking Support.
GT OverClocking Frequency
XX
Overclocked RP0 Frequency (MLC Clk) in multiples of 50 MHz
GT OverClocking Voltage
XX
Extra voltage needed above the original RP0 voltage - The unit is 1/256 volt
7.3.4.
Advanced > SATA
Feature
Options
Description
SATA Controller(s)
Enabled
Disabled
Enable / Disable SATA Device.
SATA Mode Selection
AHCI
RAID
Determines how SATA controller(s) operate.
Aggressive LPM Support
Enabled
Disabled
Enable PCH to aggressively enter link power state.
SATA Controller Speed
Gen1
Gen2
Gen3
Indicates the maximum speed the SATA controller can support.
