cExpress-BL
Page 51
Feature
Options
Description
V3.30
Read only
Display actual voltage of the V3.30.
VMEM Read
only
Display actual voltage of the VMEM.
V5.00 Read
only
Display actual voltage of the V5.00.
VIN
Read only
Display actual voltage of the VIN.
AIN7
Read only
Display actual voltage of the AIN7.
7.2.7.
System Management > Runtime Statistics
Feature
Options
Description
Runtime Statistics
Info only
Total Runtime
Read only
The returned value specifies the total time in minutes the system is running
in S0 state.
Current Runtime
Read only
The returned value specifies the time in seconds the system is running in
S0 state.
This counter is cleared when the system is removed from the external
power supply.
Power Cycles
Read only
The returned value specifies the number of times the external power supply
has been
shut down
Boot Cycles
Read only
The Bootcounter is increased after a HW- or SW-Reset or after a
successful power-up.
Boot Reason
Read only
The boot reason is the event which causes the reboot of the system.
1.1.9
System Management > Flags
Feature
Options
Description
Flags Info
only
BMC Flags
Read only
BIOS Select
Read only
Display the selection of current BIOS ROM.
ATX/AT-Mode Read
only
Display
ATX/AT-Mode.
Exception Code
Read only
System exception reason.
7.2.8.
System Management > Power Up
Feature
Options
Description
Power Up
Info only
Power Up watchdog
Note: F12 disables the Power Up Watchdog.
Enabled
Disabled
The Power-Up Watchdog resets the system after a certain amount of time
after power-up.
ECO Mode
Disable
Enable
Reduces the power consumption of the system.
Power-up Mode
ATTENTION: The Power-Up Mode only has
effect, if the module is in ATX-Mode.
Turn on
Remain off
Last State
Turn On:The machine starts automatically when the power supply is turned
on.Remain Off:To start the machine the power button has to be pressed.
