ADLINK Technology AdvancedMC AMC-8100, User Manual

Page: 60 / 76

46 BIOS Features
5.6.3 Starting the EFI Configuration Utility
The LSI EFI BSD allows you to change the default configuration of
your host adapters, using the embedded BIOS Configuration Util-
ity (CU). Enter the CU by typing the drvcfg command on the EFI
shell command line, or by pressing the ALT key when the EFI sys-
tem is not at the command line.
5.6.4 Using the EFI Configuration Utility
Refer to Chapter 8 of the
LSI Fusion-MPT Device Management
User’s Guide
for detailed instructions.
5.6.5 Exiting the EFI Configuration Utility
Because some changes only take effect after the system reboots,
it is important to exit the configuration utility properly. To exit, press
ESC and respond to the verification prompts. Some changes
might be lost if you reboot before properly exiting the configuration
utility.