ADLINK Technology ACL-7130, Manual

Page: 19 / 41

Installation
•
13
2.8 Setting of Lower IRQ Signal Polarity (JP4)
The Interrupt signal can be selected as Fall Edge trigger or Rise
Edge trigger. It can be set as jumper JP4.
Fall Edge
JP4
Rise Edge
Figure 2.6 Jumper JP4 setting
2.9 Signal Connection
There are three DIO connector. The pin assignment of the 37
pins D-type connector CN3, which is an isolated DIO signal
connector, is shown in Figure 2.7. The definitions of the non-
isolated DIO signal connectors CN1 and CN2 are shown is
Figure 2.8 and Figure 2.9 respectively.