Page 5
2. Installation
2.1 Transport
instructions
The machine comes to you
in a box or shrink-wrapped. If you have to
transport the machine at any time it is recommended that you use a
similar box and packing methods. Please let the machine cool down
and move the handle to the locked position.
N.B.
Never move the machine
with an (optional) large or standard
Mug pressing pad in place, unless a correctly fitting mug is
clamped into the printing position.
2.2
Installing the machine
2.2.1 Remove
all
packaging from the heat press.
2.2.2 Check
to
ensure
that no damage has been caused to the
machine during transit.
2.2.3
Place the machine
on a sturdy horizontal surface that is within
easy reach of the operator and allow space for the handle to
move to the loading position. Ensure that no items vulnerable
to heat radiation are too close to the machine.
2.2.4 IMPORTANT:
Ensure that the machine is secured to the
work surface with the brackets provided on the front and rear
of the machine. (See Technical Support leaflet supplied with
press).
2.2.5
Attach heat plate
power
lead and plug to control box socket.
(See Technical Support leaflet supplied with press).
2.3 Electrical
requirements
The Studio Versa Press should
be connected to the mains supply,
(nominally 230V AC for the European Market), by the mains cable
provided and a suitable plug.
The press is designed
for 230Volts AC 50/60 hertz and requires
exclusive use of a power outlet rated for at least 3.15Amps (Europe).
Ensure that
the supply rating on the machine specification plate
corresponds with your local supply and that the correct plug is fitted.
2.3.1
Wiring the plug for a 230V AC Machine
The wires
in this mains lead are coloured in accordance with the
following code:
