Page 6
Electrical requirements (Cont.)
Green and Yellow
:
EARTH
Blue
:
NEUTRAL
Brown:
LIVE
As the colours
of the wires in the mains lead of this apparatus may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:-
1.
The wire coloured green and yellow
must be connected to the
terminal in the plug, which is marked by the letter E, or by the
safety earth symbol coloured green, or green and yellow.
2.
The wire, coloured blue
must be connected to the terminal
which is marked with the letter N, or coloured black.
3.
The wire, coloured brown
must be connected to the terminal
which is marked with the letter L, or coloured red.
NOTE:
A competent service engineer must carry out any replacement of
the mains cable
.
HEATING ELEMENTS
The heating elements
fitted to this press are rated at 1325 Watts/230V
AC.
Never connect
to any outlet or power supply having a different
voltage/frequency from that on the machine data plate.
2.4
Adjusting the pressure
This pressure is altered
with the black pressure adjustment knob
located on the top of the machine:
a)
To increase pressure
or to use smaller diameter mugs turn
knob clockwise.
b) To
decrease
pressure
turn the adjustment knob anticlockwise.
c)
Be careful when placing a mug in the press,
fitted with the
(optional) large or standard Mug pressing pad, that the pressure
jaws are not in contact with the mug handle as this may cause
damage to the element.
NOTE
DO NOT adjust the pressure when the machine is clamped shut
CAUTION
Never increase the pressure to the extent of requiring undue force
to lower the operating handle into the lock position, as this will
place excessive stress on the pressing pads, resulting in damage to
the press.
Please refer to Page 21 showing the operation of the control unit.
