Page 13
1. Loosen the two table retaining bolts with a 13 mm
spanner.
2. Detach the 4-pin plug from the control box (see
arrow).
4. Slide plate table into table bracket taking care to
arrange the 4-pin plug to the rear.
3. Slide off the heat plate from retaining bracket.
5. Secure plate table with two wing nuts and washers
and attach the 4-pin plug to the control box.
6. Adjust pressure screw to suit item to be transferred
(see arrows).
7. Refitting is a reversal of removal.
3.5 Optional Plate attachment removal/refitting
