ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 14
Operating Modes: The Zipper can operate in three different
modes. In each mode you can run the fixture as a stand alone
fixture or in a master/slave confiugration. This next section will
detail the differences in the operating modes.
• Sound Active mode -
The fixture will react to sound, chasing through the built-in programs.
• Show mode -
The fixture will run one of 16 shows.
• DMX control mode -
This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller.
Universal DMX Control:
This function allows you to use a univer-
sal DMX-512 controller to control the chases and patterns, dimmer
and strobe. A DMX controller allows you to create unique programs
tailored to your individual needs.
1. The Zipper has 3 DMX Modes. See pages 17-20 for detailed
description of the DMX modes, values, and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use your DMX controller’s faders to control the various DMX fix-
ture traits.
4. Follow the instructions on page 9 to set your DMX channel mode
and the DMX address.
5. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
6. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either a single unit or several
units linked together, to run to the beat of the music.
1. Press the MENU button until “
SOUN
” is displayed, and press
ENTER. Press the UP or DOWN buttons so that “
ON
” is dis-
played and press ENTER.
2. To adjust the sound sensitivity level press the MENU button until
“SENS” is displayed, and press ENTER. Use the UP or DOWN
buttons to adjust the sensitivity level, “0” being least sensitive,
Zipper
Operation
ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 13
TEST
- This function will run a self test program. The test
program will test pan/tilt movement and colors.
1. Press the MENU button until “
TEST
” is displayed, press
ENTER.
2. The fixture will now run a self test. Press MENU to exit.
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until “
FHRS
” is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
VER
- With this function you can display the software ver-
sion of the unit.
1. Press the MENU button until “
VER
” is displayed, press
ENTER.
2. The software version will now be displayed. Press MENU to
exit
RSET
- Use this function to reset the unit.
1. Press the MENU button until “
RSET
” is displayed, press
ENTER.
2. The fixture will now reset.
Zipper
System Menu
