X-Scan LED™
Cleaning
X-Scan LED™
Trouble Shooting
Trouble Shooting:
Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure you have connected your unit into a standard 120v wall
outlet.
2.
Be sure the external fuse has not blown. The fuse is located on
the rear panel of the unit.
3. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the
internal and external optical lenses and mirror should be carried out
periodically to optimize light output. Cleaning frequency depends on
the environment in which the fixture operates (I.e. smoke, fog residue,
dust, dew). In heavy club use we recommend cleaning on a monthly
basis. Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
X-Scan LED™
DMX Traits
Channel
Value
Function
5 SHUTTER/STROBE
0 - 7 BLACKOUT
8 - 15 SHUTTER OPEN
16 - 131 STROBING SLOW - FAST
132 - 139 SHUTTER OPEN
140 - 180 SHUTTER SLOW OPEN - FAST CLOSE
181 - 189 SHUTTER OPEN
190 - 231 SHUTTER FAST OPEN - SLOW CLOSE
232 - 239 SHUTTER OPEN
240 - 247 RANDOM STROBE
248 - 255 SHUTTER OPEN
6 0 - 255 DIMMER 0% - 100%
7 MOVING HEAD MOVEMENT
0 - 7 NO FUNCTION
8 - 28 MOVEMENT 1
29 - 49 MOVEMENT 2
50 - 70 MOVEMENT 3
71 - 91 MOVEMENT 4
92 - 112 MOVEMENT 5
113 - 133 MOVEMENT 6
134 - 154 MOVEMENT 7
155 - 175 MOVEMENT 8
176 - 196 MOVEMENT 9
197 - 217 MOVEMENT 10
218 - 238 MOVEMENT 11
239 - 255 MOVEMENT 12
8 0 - 255 MOVEMENT SPEED FAST - SLOW
X-Scan LED™
Fuse Replacement
First unplug the power. The fuse holder is located next to the power
cord. Using a flat-head screw driver unscrew the fuse holder. Remove
the bad fuse and replace with a new one.
American DJ
®
- www.americandj.com - X-Scan LED™ Instruction Manual Page 16
American DJ
®
- www.americandj.com - X-Scan LED™ Instruction Manual Page 15
