American DJ
®
- www.americandj.com - X-Scan LED™ Instruction Manual Page 10
American DJ
®
- www.americandj.com - X-Scan LED™ Instruction Manual Page 9
X-Scan LED™
System Menu
System Menu: When making adjustments you can press
ENTER to confirm your setup or you can wait 8 seconds for
automatic setup. To exit without making any adjustments
press the MENU button.
ADDR -
DMX Address Setting
.
1. Tap the either the MENU, UP, or DOWN buttons until “
ADDR
”
is displayed, press ENTER.
2. The current address will now be displayed and flashing.
Press the UP or DOWN buttons to find your desired address.
Press ENTER to set your desired DMX address.
SLMD -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Tap the MENU button until “
SLMD
” is displayed, press
ENTER. Either “
SL 1
” or “
SL 2
” will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
NOTE:
In a Master/Slave configuration you can set one fixture
to Master and then set the next fixture to “
SL 2
”, the fixtures will
now have contrast movement to each other.
SOUN -
Sound Active mode.
1. Tap the MENU button until “
SOUN
” is displayed, press
ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to activate sound active mode, or
“
OFF
” to deactivate sound active mode.
3. Press ENTER to confirm.
BLND -
Blackout or Stand by mode.
1. Tap the MENU button until “
BLND
” is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes”
is displayed, press ENTER to confim. The fixture will now be in
Blackout mode. To deactivate Blackout mode, select “No” and
press Enter.
I PAN -
Pan Inversion
1. Tap the MENU button until “
I PAN
” is displayed, press ENTER.
Either NO or 1 will be displayed.
2. To activate the Pan inversion tap the UP or DOWN buttons
until
I
is displayed, press ENTER to confim. To deactivate Pan
inversion, select No and press Enter.
I TLT -
Tilt Inversion
1. Tap the MENU button until “
I TLT
” is displayed, press ENTER.
Either NO or 1 will be displayed.
2. To activate the Tilt inversion tap the UP or DOWN buttons
until
I
is displayed, press ENTER to confim. To deactivate Tilt
inversion, select No and press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Tap the MENU button until “
LED
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to keep the LED display on at
all times, or “
OFF
” to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm.
X-Scan LED™
System Menu
