Vizi Beam RXONE
System Menu
Lamp On - This function will allow the lamp to be automatically switched ON when power is
applied to the fixture.
1. Press the MENU button until “Lamp On” is displayed, and press ENTER. Either “On” or “Off” will
be displayed.
2. To turn “on” the lamp when power is applied to the fixture, press the UP or DOWN buttons until
“On” is displayed, press ENTER to confim. To turn “off” the automatic Lamp-On function, select
“Off” and press Enter.
Lamp Power On - This function will allow you to switch the lamp power on/off.
1. Press the MENU button until “Lamp Power On” is displayed, and press ENTER. Either “On” or
“Off” will be displayed.
2. To turn “on” the lamp press the UP or DOWN buttons until “On” is displayed, press ENTER to
confim. To turn “off” the lamp, select “Off” and press Enter.
Firmware Version - This will display the firmware/software version.
1. Press the MENU button until “Firmware Version” is displayed. Press the ENTER button and the
firmware/software version will be displayed.
2. Press the MENU button to leave this function.
Factory Restore - This function will restore all factory settings.
1. Press the MENU button until “Factory Restore” is displayed, and press ENTER. Either “Yes” or
“No” will be displayed.
2. To restore factory settings press the UP or DOWN buttons until “Yes” is displayed, and press EN-
TER to confim. If you do not wish restore the settings, select “No” and press Enter.
Reset - Use this function to reset the motors.
1. Press the MENU button until “Reset” is displayed, and press ENTER.
2. The fixture will now reset.
ADJ Products, LLC - www.adj.com - Vizi Beam RXONE User Manual Page 30
