ADJ VIZI BEAM RXONE User Manual Download Page 2

ADJ Products, LLC  -  www.adj.com  - Vizi Beam RXONE User Manual Page 2

©2021 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and 

instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying prod-

uct names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed 

includes all forms and matters of copyrightable materials and information now allowed by statutory or 

judicial law or hereinafter granted. Product names used in this document may be trademarks or regis-

tered trademarks of their respective companies and are hereby acknowledged. All non-ADJ Products, 

LLC brands and product names are trademarks or registered trademarks of their respective compa-

nies.

ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, 

equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic 

loss associated with the use or reliance of any information contained within this document, and/or as 

a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation 

of this product.

DOCUMENT VERSION

Due to additional product features and/or enhancements, an updated version of this docu-

ment may be available online. Please check 

www.adj.com

  for the latest revision/update of this 

manual before beginning installation and/or programming.

Date

Document 

Version

Software 

Version >

DMX 

Channel 

Mode

Notes

07/24/17

1

1.0

15/17

Initial Release

11/06/19

2

4.3

15/17

Updated Lamp Warnings Added

01/08/21

3

4.4

15/17

Primary/Secondary Update, Updated Specifications

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is key to protecting the enviroment. Please turn off all electrical products when 

they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from 

power when not in use. Thank you!

Summary of Contents for VIZI BEAM RXONE









































Reviews: