ADJ MDF2PSUX117, Safety Manual

Page: 10 / 14

10
INSTALLATION
CONNECTIONS
Each of the nine (9) Power Out connections should be linked via a power cable to a single Power
Ramp from the MDF2 system. When used in conjunction with the MDF2PSUX117 power supply,
each Power Ramp is able to support a single row of up to twelve (13) dance floor tiles, for a total of
117 dance floor tiles.
When installing the dance floor panels in place, pay close attention to the directional orientation
arrows located on the side faces of each panel. When placed correctly, these arrows should indicate
the direction of power flow from the Power Ramp to the first panel, then to each subsequent panel
down the line. These panels must be positioned in a straight line to receive and transit power. If the
panel is rotated 90 degrees, or if the panel is placed with the directional arrow pointing back
towards the power source, the panel will not receive power or be able to transmit power to
any subsequent panels down the line.
Please see the illustration below, or refer to the user manual for the ADJ MDF2-9SYS for detailed
information.
NOTE: Directional orientation arrows are depicted on the top surface of the panels for the sake of
clarity. Actual panels will have directional orientation arrows located on the sides of the panels.