ADJ HYDRO BEAM X12, User Instructions

Page: 28 / 41

28
SYSTEM MENU
WiFly
Select WiFly, and press the ENTER button to confirm. Use the UP/DOWN button to select No or Yes
and press the ENTER button to store. To select WiFly and DMX on, use the UP/DOWN button to
select No or Yes and press the ENTER button to store. With the WiFly and DMX on, you can control
the unit via wifly, and send a DMX signal via DMX cable to a nearby device that does not have WiFly
capabilities. Press the MENU button to go back to the last menu, or let the unit idle 30 seconds to exit
menu mode.
Reset Motors
Select Reset Motors, and press the ENTER button to confirm. Use the UP/DOWN button to select All
Reset, Pan/Tilt Reset, Color Reset, Gobo Reset, Frost Reset, Prism1/R‐P1 Reset, Prism2/R‐P2
Reset, Shutter Reset, or Focus Reset.
All Reset
Select All Reset, and press the ENTER button to confirm. Use the UP/DOWN button to select No or
Yes and press the ENTER button to store. Press the MENU button back to go back to the last menu,
or let the unit idle 30 seconds to exit menu mode.
Pan/Tilt Reset
Select Pan/Tilt Reset, press the ENTER button to confirm. Use the UP/DOWN button to select No or
Yes and press the ENTER button to store. Press the MENU button to go back to the last menu, or let
the unit idle 30 seconds to exit menu mode.
Color Reset
Select Color Reset, and press the ENTER button to confirm. Use the UP/DOWN button to select No or
Yes and press the ENTER button to store. Press the MENU button yo go back to the last menu, or let
the unit idle 30 seconds to exit menu mode.
Gobo Reset
Select Gobo Reset, and press the ENTER button to confirm. Use the UP/DOWN button to select No.
or Yes, and press the ENTER button to store. Press the MENU button to go back to the last menu, or
let the unit idle 30 seconds to exit menu mode.
Frost Reset
Select Frost Reset, and press the ENTER button to confirm. Use the UP/DOWN button to select No or
Yes and press the ENTER button to store. Press the MENU button to go back to the last menu, or let
the unit idle 30 seconds to exit menu mode.
Prism1/R‐P1 Reset
Select Prism1/R‐P1 Reset, and press the ENTER button to confirm. Use the UP/DOWN button to
select No or Yes and press the ENTER button to store. Press the MENU button to go back to the last
menu, or let the unit idle 30 seconds to exit menu mode.
Prism2/R‐P2 Reset
Select Prism2/R‐P2 Reset, and press the ENTER button to confirm. Use the UP/DOWN button to
select No or Yes and press the ENTER button to store. Press the MENU button to go back to the last
menu, or let the unit idle 30 seconds to exit menu mode.
Shutter Reset
Select Shutter Reset, and press the ENTER button to confirm. Use the UP/DOWN button to select No
or Yes, and press the ENTER button to store. Press the MENU button to go back to the last menu, or
let the unit idle 30 seconds to exit menu mode.
Focus Reset
Select Focus Reset, and press the ENTER button to confirm. Use the UP/DOWN button to select No
or Yes and press the ENTER button to store. Press the MENU button to go back to the last menu, or
let the unit idle 30 seconds to exit menu mode.
Display
Select Display, and press the ENTER button to confirm. Use the UP/DOWN button to select Intensity,
Display Invert, or Screen Saver Delay.