ADJ HYDRO BEAM X12, User Instructions

Page: 27 / 41

27
SYSTEM MENU
DMX Settings
Select DMX Settings, and press the ENTER button to confirm. Use the UP/DOWN button to select
DMX Address, DMX Channel Mode, or No DMX Status.
DMX Address
Select DMX Address, press the ENTER button to confirm. Use the UP/DOWN button to adjust the
address from 001 to 499/495, press the ENTER button to store. Press the MENU button to go back to
the last menu, or let the unit idle for 30 seconds to exit menu mode.
DMX Channel Mode
Select
DMX Channel Mode
, and press the ENTER button to confirm. Use the UP/DOWN button to
select Mode1 (14) or Mode2 (18), press the ENTER button to store. Press the MENU button to go back
to the last menu, or let the unit idle 30 seconds to exit menu mode.
No DMX Status
Select No DMX Status, and press the ENTER button to confirm. Use the UP/DOWN button to select
Blackout (fixture blacks out if DMX signal stops), Hold Last (fixture continues to obey the last command
it received Via DMX if DMX signal stops), or Manual (the fixture will automatically read the DMX value
in the “ManualControl” menu for operation after selecting this mode), press the ENTER button to store.
Press the MENU button to go back the last menu, or let the unit idle 30 seconds to exit menu mode.
Personality
Select Personality, and press the ENTER button to confirm. Use the UP/DOWN button to select Select
Signal, Status Settings, WiFly Settings, Reset Motors, Display, or Service.
Select Signal
Select Select Signal, and press the ENTER button to confirm. Use the UP/DOWN button to select
DMX, Wifly, or Wifly and DMX Out, press the ENTER button to store. Use the UP/DOWN button to
select No or Yes, and press the ENTER button to store. Press the MENU button to go back to the last
menu, or let the unit idle 30 seconds to exit menu mode.
Status Settings
Select Status Settings, and press the ENTER button to confirm. Use the UP/DOWN button to select
Pan Invert, Tilt Invert, P/T Feedback, P/T Speed, or Hibernation.
Pan Invert
Select Pan Invert, and press the ENTER button to confirm. Use the UP/DOWN button to select Off or
On, press the ENTER button to store. Press the MENU button to go back to the last menu, or let the
unit idle 30 seconds to exit menu mode.
Tilt Invert
Select Tilt Invert, and press the ENTER button to confirm. Use the UP/DOWN button to select Off or
On, press the ENTER button to store. Press the MENU button to go back to the last menu or let the unit
idle 30 seconds to exit menu mode.
P/T Feedback
Select P/T Feedback, and press the ENTER button to confirm. Use the UP/DOWN button to select Off
or On, press the ENTER button to store. Press the MENU button to go back to the last menu, or let the
unit idle 30 seconds to exit menu mode.
P/T Speed
Select P/T Speed, and press the ENTER button to confirm. Use the UP/DOWN button to select Speed1,
or Speed2, press the ENTER button to store. Press the MENU button to go back to the last menu, or
let the unit idle 30 seconds to exit menu mode.
Hibernation
Select Hibernation, and press the ENTER button to confirm. Use the DOWN/UP button to select OFF,
or 01M~99M, and press the ENTER button to store. Press the MENU button to go back to the last
menu, or let the unit idle 30 seconds to exit menu mode.