ADJ HYDRO BEAM X12, User Instructions

Page: 14 / 41

TO R Q U E S E T T I N G S F O R S C R E W S
A L L S C R E W S M U S T B E T I G H T E N E D W I T H A TO R Q U E D R I V E R . A l l s c r e w s
a r e A l l e n H e a d s c r e w s . P l e a s e s e e b e l o w f o r s c r e w l o c a t i o n s , s c r e w q u a n t i t y
a n d t o r q u e s e t t i n g s . T h e n u m b e r l i s t e d i n t h e “ # ” c o l u m n c o r r e s p o n d s t o t h e
l o c a t i o n o n t h e f i x t u r e . S e e t h e f i x t u r e d i a g r a m a n d n u m b e r o n t h e n e x t p a g e
f o r S C R E W L O C AT I O N d e p i c t i o n s .
1 Lens Assembly to Head Casting (x10) 6.5-8.7 In-Lb / 3mm Hex
2 Lamp Cover to Head Casting (x4) 6.7-9.6 In-Lb / 4mm Hex
3 Yoke Arm Cover to Yoke Frame (11 x Each Side = 22 Total) 6.5-8.7 In-Lb / 3mm Hex
4 Access Cover to Yoke Frame (x4) Manual Screwdriver / 3mm Hex
5 Bottom Cover to Base Casting (x12) 6.7-9.6 In-Lb / 3mm Hex
6 Power & Data Connector to Base Casting (x14) 6.5-8.7 In-Lb / Torx T8
7 1/4 Turn Adapter Plate to Bottom Cover (x16) 6.5-8.7 In-Lb / 3mm Hex
TORQUE DRIVERS (Recommended): UTICA TS-30 (Shown)
ALTERNATIVE DRIVERS:
Proto J6107A
Wiha 28887
CAUTION! DO NOT OVER TORQUE SCREWS AS THIS CAN CAUSE LEAKAGE
ISSUES! TO CONFIRM THE IP65 INTEGRITY AFTER A LAMP REPLACEMENT, TEST
THE FIXTURE USING THE ELATION IP TESTER. CONTACT ELATION SERVICE FOR
MORE DETAILS.
14