ADJ HYDRO BEAM X12, User Instructions

Page: 25 / 41

SYSTEM MENU
25
Menu Submenu Options Description
DMX Settings
DMX Address 001-512 DMX Addressing
DMX Channel Mode Mode1(14)/Mode2(18) DMX Channel Mode Selection
No DMX Status Hold Last / Blackout / Manual DMX Lost Status
Personality
Select Signal
DMX: Yes / No Control via DMX
WiFly: Yes / No Control via WiFly
WiFly and DMX Out: Yes / No
Control via WiFly and send DMX Out
via DMX cable
Status Settings
Pan Invert: On / Off Reverse Pan Motion
Tilt Invert: On / Off Reverse Tilt Motion
P/T. Feedback: On / Off Pan/Tilt Movement Feedback
P./T. Speed: Speed 1 / Speed 2 Pan/Tilt Movement Speed
Hibernation: Off / 01M~99M / 15M Sleep Setting (No Activity)
WiFly Settings
Set WiFly Channel: 00~14 Set WiFly Wireless Channel
Enable / Disable WiFly Activate / Deactivate WiFly
Reset Motors
All Reset: Yes / No Reset All Motors
Pan/Tilt Reset: Yes / No Reset the Pan & Tilt Motors
Color Reset: Yes / No Reset the Color Wheel Motor
Gobo Reset: Yes / No Reset the Gobo Wheel Motors
Frost Reset: Yes / No Reset the Frost Motor
Prism1/R-P1 Reset: Yes / No Reset the Prism1/R-P1 Motors
Prism2/R-P2 Reset: Yes / No Reset the Prism2/R-P2 Motors
Shutter Reset: Yes / No Reset the Shutter Motors
Focus Reset: Yes / No Reset the Focus Motors
Display
Intensity: 1~10 (Dimmest-Brightest) Display Brightness
Display Invert: Yes / No Display Readout Inversion
Screen Saver Delay: Off~10M Display Shutoff Time
Service Pass Code = 050
Calibration
(Pass Code = 050)
Calibration Adjustment
USB Port Power On/Off
Update Software
Factory Restore Yes / No
(Pass Code = 011)
Restore Factory Settings
Manual Control
Pan 000-255
Manual Control
Tilt 000-255
Color 000-255
Gobo 000-255
Prism1 000-255
RPrism1 000-255
Prism2 000-255
RPrism2 000-255
Strobe 000-255
Dimmer 000-255
Focus 000-255
Frost 000-255