ADJ FLAT PAR TW5, User Manual

Page: 9 / 26

ADJ Products, LLC - www.adj.com - Flat Par TW5 User Manual Page 9
WW/CW/A Dimmer Mode:
1. Plug the fixture in and press the MODE button until one of the following is displayed:
• “H.XXX” for Warm White dimming mode.
• “C.XXX” for Cool White dimming mode.
• “A.XXX” for Amber dimming mode.
2. Press the UP and DOWN buttons to adjust intensity.
3. After you have adjusted the colors to the desired levels, you can then activate strobing by press-
ing the SET UP button.
4. “S.XXX” will be displayed, indicating that the device is in strobing mode. The strobing can be
adjusted between “S.000” (strobe off) to “S.015” (fastest strobe).
Sound Active Mode:
In this mode the Flat Par TW5 will react to sound, and chase through the different colors.
1. Plug the fixture in and press the MODE button until “So-X” is displayed. “X” represents the sound
active mode (1-8) that is currently in use.
2. The fixture will now change via sound.
3. To adjust the sound sensivity, press the SET UP button. “SJ-X” will be displayed. Use the UP or
DOWN buttons to adjust the sensitivity. “SJ-1” is the least sensitive, and “SJ-8” is the most sen-
sitive.
Auto Run Mode:
1. There are 3 Auto Run Modes to choose from: Color Fade, Color Change, and both modes run-
ning together. The running speed is adjustable in all 3 modes.
2. Plug the fixture in and press the MODE button until either “AF-X”, “AJ-X”, or “A-JF” is displayed.
• AF-X = Color Fade mode, with 8 Color Fade modes to choose from. Use the UP or DOWN
buttons to scroll through the different Auto Fade modes.
• AJ-X = Color Change mode, with 8 Color Change modes to choose from. Use the UP or
DOWN buttons to scroll through the different Auto Change modes.
• A-JF = Both Color Fade and Color Change modes running.
3. After you have chosen your desired running mode, press the SET UP button until “SP.XX” is
displayed. When this is displayed you can adjust the running speed of your desired program. Use
the UP or DOWN button to adjust the speed between “SP.01” (slowest) and “SP.16” (fastest).
4. Once you have set your desired running speed, press the SET UP button to return to your desired
Auto Run Mode.
Static Color Mode:
1. Plug the fixture in and press the MODE button until “CLXX” is displayed.
2. There are 32 colors to choose from. Select your desired color by pressing the UP and DOWN
buttons. After you have selected your desired color you can activate strobing by pressing the
SET UP button to enter the strobe mode.
3. “S.XXX” will be displayed, indicating that the device is in strobing mode. The strobing can be
adjusted between “S.000” (strobe off) and “S.015” (fastest strobe).
Flat Par TW5 Operating Instructions