ADJ FLAT PAR TW5, User Manual

Page: 12 / 26

Flat Par TW5 ADJ LED RC3 Operation
ADJ Products, LLC - www.adj.com - Flat Par TW5 User Manual Page 12
The ADJ LED RC3 infrared remote (sold seperately) gives you complete control of your fixture. For
best results, the controller must be aimed at the front of the fixture and be within the maximum oper-
ating range of 30 feet. To use the ADJ LED RC3, you must first activate the fixture’s infrared receiver,
as shown in the Operating Instructions section of this manual.
BLACKOUT - Pressing this button will blackout the fixture.
AUTO RUN - Pressing this button will cycle through the auto run mode, color fade mode, and color
change. You can control the speed of the 3 modes by pressing the SPEED button first, then pressing
the “+” and “-” buttons. In color fade and color change mode, press the “+” and “-” buttons to scroll
through the 8 modes.
PROGRAM SELECTION - Pressing this button activates static color mode. Use the “+” or “-” to
scroll through the 32 colors. Press Flash to activate/deactivate strobing. Use the “+” and “-” buttons
to adjust the strobe speed.
DMX MODE - Press this button to cycle between DMX Channel mode selection, DMX addressing,
DMX State, and dimming curve selection. Each press of this button will change to the next mode.
• In DMX State mode, press the the “+” and “-” buttons to scroll through the DMX state modes.
See the Operating Instructions section of this manual for detailed information.
• In DMX address mode, press the the “+” and “-” buttons to adjust the DMX address.
• In dimmer curve mode, press the the “+” and “-” buttons to scroll through the dimmer curves.
See the Operating Instructions section of this manual for detailed information.
• In DMX Channel selection, press the the “+” and “-” buttons to scroll through the different DMX
Channel modes. See the Operating Instructions section of this manual for detailed informa-
tion. The fixture’s LEDs will glow in different colors to signify the selected DMX Channel Mode, as
described in the table below:
LED COLOR DMX CHANNEL MODE
Warm White 2 Channel Mode
Cool White 3 Channel Mode
Amber 4 Channel Mode
Warm White & Cool White 5 Channel Mode
Warm White & Amber 8 Channel Mode
Cool White & Amber 9 Channel Mode
SOUND ACTIVE - This button activates sound active mode. Use the “+” and “-” buttons to scroll
through the 8 sound active modes. Press the Speed button and use the “+” and “-” buttons to ad-
just the sound sensitivity level.
SECd - This designates the fixture as a secondary fixture in a primary/secondary configuration.