A.D.J. Supply Europe B.V.
– www.adj.eu – Element QAIP Instruction Manual Page 8
LAYOUT DIAGRAM
1. Battery On/Off Switch: This switch is used to activate the battery power. You must also activate the LOAD
function. See page 17
“Load Setting” to activate.
2. Kickstand: This kickstand is used to angle the unit to various degrees. There are 3 different degree levels.
Note: Be very cautious at the degree in which you angle the unit at, due to the fact that it could fall over.
3. Power Input & Fuse Holder: This input is used to connect the included I.E.C. power cord. After connecting
the power cord, plug the other end into a matching power source. Located inside the power socket is the fuse
housing. See page 23 for fuse replacement.
4. Mode Button: This button lets you scroll through the system menu.
Setup Button: This button lets
you Enter submenu’s.
Up & Down Button: These buttons are used to scroll through submenus and make adjustments in the
submenus.
5. Digital Display: This will display the various menus, submenus, and adjustments.
6. Control Panel Access Door: Lifting this door will allow you to access the controls and functions.
7. USB Update Port
SET UP
Power Supply:
The ADJ Element QAIP contains an automatic voltage switch, which will auto sense the
voltage when it is plugged into the power source. With this switch, there is no need to worry about the correct
power voltage, this unit can be plugged in anywhere.
