A.D.J. Supply Europe B.V.
– www.adj.eu – Element QAIP Instruction Manual Page 18
OPERATING INSTRUCTIONS (continued)
Sound Active Mode:
1. Plug the fixture in and press the MODE
button until “SoXX” is displayed. “XX” represents the current sound
active mode (1-16).
2. Use the UP or DOWN buttons to find your desired sound active mode.
3. Press the SET UP button to enter sound sensitivity adjustment. “SJ-X” will be displayed. Use the UP or
DOWN buttons to adjust the sensitivity. “SJ-1” is the lowest sensitivity, “SJ-8” is the high- est. “SJ-0” turns the
sound sensitivity off.
RGBA Dimmer Mode:
1. Plug the fixture in and press t
he MODE button “r: XXX” is displayed. You now are in Red dimming mode.
Press the UP and DOWN buttons to adjust intensity. After you have finished adjusting the intensity, or if you
would like to skip to the next color, press the SET UP button.
2. When “G: XXX” is displayed you are in Green dimming mode. Press the UP and DOWN buttons to adjust
intensity.
3. When “b: XXX” is displayed you are in Blue dimming mode. Press the UP and DOWN buttons to adjust
intensity.
4. When “A: XXX” (Amber) is displayed you are in Amber dimming mode. Press the UP and DOWN buttons to
adjust intensity.
5. After you have adjusted the colors to make your desired color you can then activate strobing by pressing the
SET UP button to enter the strobe mode.
6. “FS: XX” will be displayed, this is strobe mode. The strobe can be adjusted between “00” (flash off) to “15”
(fastest flash).
Static Color Mode:
1. Plug the fixture in and press the M
ODE button until “CLXX” is displayed.
2. There are 63 colors to choose from. Select your desired color by pressing the UP and DOWN buttons. After
you have selected your desired color you can activate strobing by pressing the SET UP button to enter the
Flash (strobe) mode.
3. “FS.XX” will be displayed, this is Flash mode. The Flash can be adjusted between “FS.00” (flash off) to
“FS.15” (fastest flash).
Auto Run Mode:
There are 3 types of Auto Run Modes to choose from; Color Fade, Color Change, and both modes running
together. The running speed is adjustable in all 3 modes.
1. Plug the fixture in and press the MODE button until either “AFXX”, “AJXX”, or “A-JF” is displayed.
• AFXX = Color Fade mode, there are 16 Color Fade modes to choose from. Use the UP or DOWN buttons to
scroll through the different Auto Fade modes.
• AJXX = Color Change mode, there are 16 Color Change modes to choose from. Use the UP or DOWN
buttons to scroll through the different Auto Change modes.
• A-JF = Both Color Fade and Color Change modes running.
2. After you have chosen your desired running mode press the SET UP button until “SP.XX” is displayed.
When this is displayed, you can adjust the running speed of your desired program. Use the UP or DOWN
button to adjust t
he speed between “SP.01” (slowest) and “SP.16” (fastest). Once you have set your desired
running speed, press the SET UP button to return to your desired Auto Run Mode.
