13
C L E A N I N G & M A I N T E N A N C E
WARNING! DISCONNECT UNIT FROM POWER BEFORE PERFORMING ANY
CLEANING OR MAINTENANCE PROCEDURES!
ALWAYS ALLOW THE FIXTURE TO COOL FOR AT LEAST 15 MINUTES BEFORE
PERFORMING ANY CLEANING OR MAINTENANCE!
CLEANING
Frequent cleaning is recommended to ensure proper function and an extended life. The frequency of
cleaning depends on the environment in which the device operates: damp, smoky, or particularly dirty
environments can cause greater accumulation of dirt on the device’s surfaces. Clean periodically with
a soft cloth to avoid dirt/debris accumulation.
NEVER use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to ensure proper function and extended life. There are no user
serviceable parts inside this fixture. Please refer all other service issues to an authorized ADJ service
technician. Should you need any spare parts, please order genuine parts from an authorized ADJ
dealer.
Please refer to the following points during routine inspections:
• A detailed electrical check by an approved electrical engineer every three months, to make sure
the circuit contacts are in good condition and prevent overheating.
• Be sure all screws and fasteners are securely tightened at all times. Loose screws may fall out
during normal operation, resulting in damage or injury as larger parts could fall.
• Check for any deformations on the housing, rigging hardware and rigging points (ceiling, suspen-
sion, trussing). Deformations in the housing could allow for dust to enter into the fixture. Damaged
rigging points or unsecured rigging could cause the fixture to fall and seriously injure a person(s).
• Electric power supply cables must not show any damage, material fatigue or sediments.
Summary of Contents for 810087371265
Page 1: ...User Manual POWER BONE T1T1 EXTEND YOUR WORLD TM ...
Page 16: ......