12
I N S TA L L AT I O N
CONNECTIONS
• Up to four (4) devices may be connected to each Power Bone device using the Seetronic outlets
located on either side of the Power Bone device.
• Two (2) USB outlets located on the “Power Thru” end of the Power Bone can be used to charge or
operate low-power devices.
• When the Power Bone is connected to the power source, the LEDs on the sides will illuminate to
indicate that the device is receiving power.
• If desired, multiple Power Bone devices can be linked together by using the “Power In” and
“Power Thru” ports located on the ends of each Power Bone device. Please note that the “Power
Thru” port is located on the end with the USB ports, while the “Power In” port is located by itself on
the other end.
• Use caution when linking multiple Power Bone units. The number of Power Bone units that can
be safely linked is dependent upon the individual power requirements of each device that is
connected to the Power Bone unit(s). Up to 15A maximum can be connected on a single daisy
chain of Power Bone units.
A QUALIFIED ELECTRICIAN SHOULD BE USED FOR ALL ELECTRICAL CONNECTIONS AND/
OR INSTALLATIONS. DO NOT INSTALL THE DEVICE IF YOU ARE NOT QUALIFIED TO DO SO!
POWER
SOURCE
DEVICE 1
POWER
IN
POWER
THRU
ADDITIONAL
DEVICES
POWER
IN
POWER
THRU
DEVICE 2
Summary of Contents for 810087371265
Page 1: ...User Manual POWER BONE T1T1 EXTEND YOUR WORLD TM ...
Page 16: ......
