manualshive.com logo in svg

ADInstruments Bridge Amp, Owner'S Manual

The ADInstruments Bridge Amp is a powerful and versatile device that enhances your research capabilities. With its precise data collection and high signal fidelity, this product provides unparalleled accuracy. Harness the full potential of the Bridge Amp by easily accessing its comprehensive Owner's Manual for free download at manualshive.com.

Share
Download
background image

 

Bridge Amp

 

 

 

Owner’s Guide

 

18

 

Analog Output Sockets

 

BNC sockets on the back panel of the Bridge Amp provide the signal 
outputs to connect to the analog input sockets on the front of the 
PowerLab. The sockets are labelled Signal Output on a Bridge Amp 
and Output 1 to Output 4 or 8 on Quad or Octal Bridge Amps. You 
don’t have to match the channel numbers when connecting outputs to 
inputs, but it helps to prevent confusion if you do. A BNC-to-BNC 
cable is supplied for each connection. 

 

Using Transducers

 

Bridge Amps are designed to allow the PowerLab to connect to most 
DC bridge transducers, including commonly available force, pressure, 
and displacement transducers, temperature probes, light meters, and 
similar devices. They are capable of supporting various powered 
transducers, and certain low-impedance unpowered (or self-powered) 
transducers.

ML221 Bridge Amp

ML224 Quad Bridge Amp

ML228 Octal Bridge Amp

 

Figure 1–2

 

The back panels of the

Bridge Amps

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Bridge Amp























































Reviews:

No comments

Related manuals for Bridge Amp

Pall T Series Care And Use preview
T Series
Brand: Pall Pages: 51
ZAMST A1 Instructions For Use Manual preview
A1
Brand: ZAMST Pages: 21
ZOLL R Series In-Service Manual preview
R Series
Brand: ZOLL Pages: 5
Accu-Chek Compact Pocket User Manual preview
Compact
Brand: Accu-Chek Pages: 3
iBin Compact Installation Instructions preview
Compact
Brand: iBin Pages: 2
OfiTE PPT Instruction Manual preview
PPT
Brand: OfiTE Pages: 21
Earthlite Deluxe Quick Start Manual preview
Deluxe
Brand: Earthlite Pages: 4
YATEK Deluxe Mounting And User Manual preview
Deluxe
Brand: YATEK Pages: 78
Tascam CD-RW5000 Owner'S Manual preview
CD-RW5000
Brand: Tascam Pages: 27
Jay-Lor A50 Owner'S Manual preview
A50
Brand: Jay-Lor Pages: 72
MacDon TM100 Manual preview
TM100
Brand: MacDon Pages: 198
M-Triangel M1 Operating Instruction preview
M1
Brand: M-Triangel Pages: 6
1010music Toolbox Quick Start Manual preview
Toolbox
Brand: 1010music Pages: 2
1010music Blackbox Quick Start Manual preview
Blackbox
Brand: 1010music Pages: 4
Idmed ToFscan Quick Start preview
ToFscan
Brand: Idmed Pages: 2
Labnet Spectrafuge 6C Instruction Manual preview
Spectrafuge 6C
Brand: Labnet Pages: 12
Labnet Accublock D1301 User Manual preview
Accublock D1301
Brand: Labnet Pages: 13
Ultrawave Neon Series Operator'S Manual preview
Neon Series
Brand: Ultrawave Pages: 30

Brands by name

Popular brands

Load more brands