AD Instruments
_______________________________________________________________________________
©Copyright Abacanto Digital SA.
Manual de usuario AD-9962
30
·
UK Safety Authorities recommend the use of fused test leads when measuring voltage on
high energy systems.
·
Replacement fuses
must
be of the correct type and rating.
·
The instrument
must not
be used if any part of it is damaged.
·
Warnings and precautions must be
read and understood
before an instrument is used.
They must be observed during the operation of this instrument.
Symbols used on this instrument are:
Caution: refer to accompanying notes.
This symbol indicates that the operator must refer to an explanation in the
Operating Instructions to avoid personal injury or damage to the meter.
Caution: risk of electric shock
This WARNING symbol indicates a potentially hazardous situation, which if
not avoided, could result in death or serious injury.
This CAUTION symbol indicates a potentially hazardous situation, which if not
avoided, may result damage to the product.
This symbol advises the user that the terminal(s) so marked must not be
connected to a circuit point at which the voltage with respect to earth ground
exceeds (in this case) 1000 VAC or VDC.
Equipment protected throughout by Double Insulation (Class II)
Equipment complies with current EU directives.
SYMBOLS AND ANNUNCIATORS
·
)))
Continuity
Low Battery
Diode test
HOLD
Data Hold
AUTO
AutoRanging
AC
Alternating Current or Voltage
DC
Direct Current or Voltage
V
Volts
A, mA,uA
Current range
MAX
500V
