background image

5

ADICOS GSME-X20

408-2410-004 EN22

About this mAnuAl

About this manual

1.1  Objective

This  manual  describes  the  special  requirements  on  installation,  wiring,  commissioning,  and 

operation  of  ADICOS  detectors  for  explosive  atmospheres  up  to  ATEX  zone  20.  They  are 

exclusively addressed to knowledgeable specialist personnel (–› Chap. 2, Safety instructions).

1.2  Explanation of Symbols

This manual features a continuous structure for best possible comprehension. The following 

labels are used. 

Warning signs

The following types of notes are used through this manual.

DANGER!

This combination of symbol and signal word indicates an immediately

dangerous situation that will lead to death or severe injuries if not avoided.

WARNING!

This combination of symbol and signal word indicates a possibly dangerous

situation that could lead to death or severe injuries if not avoided.

Explosion Protection

This information type signals measures that must be implemented for maintain

-

ing the Explosion protection.

Tips and recommendations

Helpful tips and recommendations as well as information to ensure efficient and 

uninterrupted use.

1.3 

Storing the Manual

Store this manual easily reachable and in direct vicinity of the detector system to enable use 

as needed.

Summary of Contents for GSME-X20

















Reviews: