ADIC LTO 200D, User Manual, Page: 55 / 65

Troubleshooting and Diagnostics 43
After you insert the cartridge, the front panel indicators display the following:
Indicator State, Character, or Message
Status
LED Amber, solid
Single-character display
F
, flashing
LCD
Fast R/W Diagnostic
Tape Loading ======
LCD which will be followed by:
Fast R/W Diagnostic
Writing ======
which will alternate with:
Fast R/W Diagnostic
Locating ======
for several minutes, followed by:
Fast R/W Diagnostic
Reading ======
which will alternate with:
Fast R/W Diagnostic
Locating ======
which will loop back to Writing and continue for several minutes until the
display changes to:
Fast R/W Diagnostic
Erasing ======
And then it will repeat the previous steps until completed.
The drive takes approximately 20 minutes to complete the tests.
If the diagnostics are successfully completed, the test will loop and begin again.
5. Press the Unload button to exit Maintenance Mode . The front panel indicators display the following:
Indicator State, Character, or Message
Status LED Off
Single-character display Off
LCD
Ultrium Tape Drive
Drive Empty
If an error occurs while the drive is running the
Fast R/W Diagnostic
, the front panel indicators display the following:
Indicator State, Character, or Message
Status LED Amber, flashing
Single-character display
5
,
flashing
LCD
Error!
Drive Problem