ADF Web HD67E26-A1, User Manual

Page: 16 / 26

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual EtherCAT Slave / EtherNet/IP Master
Document code: MN67E26_ENG Revision 1.000 Page 16 of 26
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses,
EtherCAT and EtherNet/IP.
By Pressing the “
Set Communication ” button from the main window for SW67E26
(Fig. 2) the window “Set Communication” appears (Fig. 3).
The means of the fields for “EtherCAT Slave” are:
In the field “ Revision Number ” the revision number of the converter is
defined;
In the field “ Slave Name ” the name of the converter is defined;
In the field “Node Address ” the ID of the converter is defined.
The means of the fields for “EtherNet/IP Master” are:
In the fields “ IP ADDRESS ” the IP address for EtherNet/IP side of the
converter is defined;
In the fields “ SUBNET Mask ” the SubNet Mask for EtherNet/IP side of the
converter is defined;
In the fields “ GATEWAY ” the default gateway of the net is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature
is used for going out of the net;
In the field “ Port ” the port used for EtherNet/IP communication is defined.
The port has a fixed value of 44818.
Figure 3: “Set Communication” window