ADF Web HD67E26-A1, User Manual

Page: 19 / 26

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual EtherCAT Slave / EtherNet/IP Master
Document code: MN67E26_ENG Revision 1.000 Page 19 of 26
Figure 5: “Set EtherNet/IP Slaves Access” window
ETHERNET/IP ACCESS:
By Pressing the “ EtherNet/IP Access ” button from the main window for SW67E26 (Fig. 2) the window “Set EtherNet/IP Master Access”
appears (Fig. 5).
This section is used to define the list of the EtherNet/IP Master to read/write with the EtherCAT Slave.
The means of the fields are:
If the field “ Enable ” is checked, the polling to the EtherNet/IP Master is enabled;
In the field “ IP Address ” the IP Address of the EtherNet/IP Master is defined;
In the field “ Start Input ” the starting Input byte of the EtherNet/IP Master to map on EtherCAT side is defined;
In the field “ Num Input ” the number of consecutive Input byte to map on EtherCAT side is defined;
In the field “ Start Output ” the starting Output byte of the EtherNet/IP Master to write from EtherCAT side is defined;
In the field “ Num Output ” the number of consecutive Output byte to write from EtherCAT side is defined;
In the field “ Time Poll ” the polling time in ms is defined;
In the field “ Instance T > O ” the instance of the assembly for the Target to Originator data direction is defined;
In the field “ Conn. Point T > O ” the connection point of the assembly for the Target to Originator data direction is defined;
In the field “ Instance O > T ” the instance of the assembly for the Originator to Target data direction is defined;
In the field “ Conn. Point O > T ” the connection point of the assembly for the Originator to Target data direction is defined;
In the field “ Dim Header T > O ” the dimension of the header for the Target to Originator data direction is defined;
In the field “ Dim Header O > T ” the dimension of the header for the Originator to Target data direction is defined;
In the field “ Mnemonic ” a brief description is defined.